• Follow us
Home > News > Content
Chain Drive Gear
May 31, 2016

Presented in this paper in order to improve stability, reduce dynamic loads more with smaller sprocket teeth as well. But small number of sprocket teeth should not be excessive, otherwise =i will be very strong, thus enabling earlier jumping chain drive failure.

Chain after working for some time, thinner, to make the sleeve wear the PIN and roller thinner, in the presence of a tensile load f, the pitch of the chain elongation. Chain pitch long after the chain around the sprocket on the season round d moves toward the top.

Chain an even number of sections to avoid using adapters. For uniform wear, improve life expectancy, sprocket teeth number best with the chain link number coprime if cannot guarantee the coprime, should also make it the lowest common denominator as small as possible.